COVERED: In regards to air conditioning, all parts of the following systems are covered:

Ducted central electric split and package units
Wall air conditioners
Mini-splits

When air conditioning system replacement is necessary, coverage includes upgrading of duct connections, plenums and indoor electrical lines up to and including the disconnect, including when required to maintain compatibility and compliance with SEER, HSPF and refrigerant standards.

In addition to the specific terms listed here, coverage may be limited by general exclusions and limitations in the home warranty contract. Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

Coverage of certain air conditioning systems is limited to $2,000. This limit does NOT apply to the majority of A/C systems, which are either central air or heat pump based. This limitation only applies to access, diagnosis and repair or replacement of any water source heat pumps (non geothermal), glycol, hot water, or steam circulating system. Coverage of ductwork is limited to $1,500 in certain circumstances. Please see the “Air Conditioning and Heating Note” in the sample contract for details.

NOTE: Australian Home Protect will pay up to $10 per pound per occurrence for refrigerant. Customer is responsible for payment of any costs in excess of $10 per pound.

COVERED: In regards to heating systems, this option covers all of the following components and parts:

Forced air (gas, electric, oil)
Wall mounted heaters
Floor furnaces
Package units
Heat pumps
Mini-splits
Hot water or steam circulating heat
Electric baseboard
Room heaters
Cable heat (if main source of heat to the home or room)

When heating system replacement is necessary, coverage includes upgrading of duct connections, plenums and indoor electrical lines up to and including the disconnect, including when required to maintain compatibility and compliance with SEER, HSPF, and refrigerant standards. ELECTRICAL

COVERED: This option covers all components and parts, including Direct Current (D.C.) wiring, lighting fixtures, and built-in exhaust/vent/attic fans.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED:

Leaks and breaks of water, drain, gas, waste or vent lines
Toilets and related mechanisms
Toilet wax ring seals
Valves for shower
Tub
Diverter
Angle stops
Risers and gate valves (similar features of finish and style used when replacement is necessary)
Hose bibs
Basket strainers
Permanently installed sump pumps (ground water only)
Built-in bathtub whirlpool motor, pump, and air switch assemblies
Pressure regulators
Expansion tanks
Sewage ejector pump (septic system sewage ejector pumps are not covered unless optional coverage H.4 is purchased)
Clearing of sink, bathtub, shower, and toilet stoppages – Clearing of mainline drain and sewer stoppages through an
accessible cleanout up to 100 feet from access point
Clearing of lateral drain line stoppages up to 100 feet from access point including accessible cleanout, p-trap, drain or overflow access points

NOTE: Where covered repairs require access to plumbing, Australian Home Protect will provide access to plumbing only through unobstructed walls, ceilings or floors, and will return access openings to a rough finish. If the plumbing is accessible only through a concrete floor, wall or ceiling, Australian Home Protect will pay up to $1000 per contract term for access, diagnosis, repair, or replacement of such plumbing, including returning access openings to a rough finish. Customer is responsible for payment of any costs in excess of $1000.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: This option covers the repair or replacement of components and parts of standard or tankless water heaters and circulating pumps that malfunction due to normal wear and tear.

In addition to the specific terms listed here, coverage may be limited by general exclusions and limitations in the home warranty contract. Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts, except when part of the intercom system.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: Battery operated and hardwired units.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: This option covers the repair or replacement of components and parts that malfunction due to normal wear and tear.

In addition to the specific terms listed here, coverage may be limited by general exclusions and limitations in the home warranty contract. Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: This option covers the repair or replacement of components and parts that malfunction due to normal wear and tear.

NOTE: Australian Home Protect will pay up to $1,500 per dual compressor refrigerator and built-in combination of both an All-Refrigerator and an All-Freezer for access, diagnosis and repair or replacement. Customer is responsible for payment of any costs in excess of $1,500 per dual compressor refrigerator and built-in combination of both an All-Refrigerator and an All-Freezer.

Please see the Note in the “Refrigerators” section of the sample contract for details.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

NOTE: Australian Home Protect will pay up to $500 per built-in microwave oven diagnosis and repair or replacement. Customer is responsible for payment of any costs in excess of $500.

Please see the Note in the “Built-In Microwave Ovens” section of the sample contract for details.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: All components and parts.

Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

Shared equipment is covered. If equipment is not shared, then only one or the other is covered unless an additional fee is paid.

COVERED: Above ground components and parts of the heating, pumping, and filtration system including:

Pool sweep motor and pump
Pump Motor
Blower motor and timer
Plumbing pipes and wiring
Plumbing and electrical
Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.

COVERED: This Agreement covers all components of well pump, provided the well is the primary water source to the covered home.

This Agreement does NOT cover the following list of modules, components and parts relating to the well pump: (i) well casings; (ii) holding and storage tanks; (iii) piping or electrical lines leading to or connecting pressure tank and covered home; (iv) re-drilling of wells; (v) booster pumps; and (vi) components for geothermal/heat pumps.

COVERED:

Mainline stoppages that can be cleared through an existing access or clean out without excavation Sewage ejector pump for septic system only Please see the “Coverage Overview” and “Limitations and Exclusions” section of the sample contract for additional coverage information.